Passmores 5.4m x 6.0m Double Carriage House & 2.4m Workshop with FELT roof option

DETAILED SPECIFICATION

Wall Construction. Factory made wall panels are constructed from softwood sole and head plates with studs at 600mm centres.

Frame size is 4 x 2 CLS (38 x 90).

Racking forces are taken by cut in raking noggins.

Cladding can be either 2 ex. 32 x 150 sawn rebated weatherboard or 19 x 125 planed rebated shiplap, (we will ask you for your preference during the ordering process).

Cladding is fixed over Sisalkraft dpm with 12 gauge rust resistant nails.

Cladding and sole plate are pressure preservative treated.

Oak entrance frame has curved braces and is morticed, tennoned and pegged.

Partitions are clad on side facing Carriage House to eaves in shiplap or weatherboard and from eaves to ridge in tgv.

The workshop window is positioned in the front elevation and the personal door in the front half of the partition.

Roof Construction. 15mm osb III is supported by trussed rafters constructed to BS 5268 Part III and spaced at 600 centres.

The roof is weathered by a single layer of Ruberoid HP180 high performance grey mineral felt.

Pressure treated bargeboards and fascias are supplied. Ridge height 3.71m.